Text Programming; Clerk Names; Logo Messages - Sharp XE-A303 Instruction Manual

8

Text Programming

Please refer to "Guidance for text programming" on page 13 as for how to entering characters.
When you press an appropriate number key (job code number) and press the
start programming with the
Then a little after displaying guidance message indicating what programming you are in, the register may ask you to
enter the first parameter. Referring to the corresponding "Procedure", enter a parameter and start character entries.

Clerk names

(12 digits)
Key operation example
DAVID
*1 For clerk no. 1 to 4, the names "CLERK 01" to "CLERK 04", are automatically assigned respectively by
default. You also need to assign clerk codes for each clerk. By default, clerk codes 1 to 4 are programmed for
clerk no. 1 to 4. For clerk no. 5 through 25, refer to "Clerk code assignment" on page 76.
*2 Use the and

Logo messages

The register can print programmed messages on every receipt. On the standard model, a 6-line logo message is
printed on the receipt. If you want to print in other logo message format, please change the format. For the
programming details, refer to page 76. The options are listed below:
* "Header 3-line message" type: 1 to 3
"Footer 3-line message" type : 4 to 6
"Header 6-line message" type: 1 to 6
"Header 3-line and footer 3-line message" type: 1 to 6 (1 to 3 as header, 4 to 6 as footer)
key, the cash register will automatically be ready for text entry.
*1
Clerk no.
(1-25)
To program another clerk
Operator display
CLERK NAME PROG.
5
ENTER CLERK NO.
CLERK 01
1
01
DAVID
*
2
01
CLERK NAME PROG.
ENTER CLERK NO.
keys to delete unnecessary text data as necessary.
(6 lines and 30 digits for each line)
*Line number
(1-6)
1
QUICK START GUIDE
Part
To keep current setting
Character keys
(max. 12 digits)
5
0.00
067
_
032
0.00
0.00
PGM
0.00
To keep the current setting
Character keys
(max. 30 digits)
To program another line
2
Part Part
key for text entry just after you
Print
3
25