Transferring Data - Sharp OZ-5600 Operation Manual

Transferring Data

There are several ways to transfer information – whether
specific entries or entire files – between the Organizer and
other information processing devices, including personal
computers and other SHARP Organizers. In this way, you
Transferable data and
direction of transfer
Transfer device
( : sent from 5600,
: received in 5600)
Another OZ-5600 Single entries, entire files/
Organizer, OZ-5500, applications
OZ-6500, ZR-5000
and OZ-9000 series
Organizer (See p.174
and p.176)
Personal computer Single entries, entire files/
(See p.180) applications
* Depending upon the SHARP or third-party software you are using, some features and capabilities may vary.
+
The auto power off function (see p.50) is disabled in
all transfer modes.
When transferring data from other models, only entries in a
mode (application) supported on the OZ-5600 Organizer
can back up your information to guard against losing it, or
copy information so that you or someone else can work
with it on another device. A summary of transfer devices,
transferable data, and tasks to which a transfer device is
most suited is provided in the table below.
Peripherals required
None for infrared transfers;
CE-315L for cable transfers
Software* + CE-IR2 or
compatible Organizer link
cables or CE-137T + RS-232C
interface cable
can be sent. However, the Notebook application on some
other models corresponds to the Memo application on the
OZ-5600 Organizer.
Most suitable task
Exchanging data with other OZ-5600
Organizers, OZ-5500, OZ-6500, ZR-5000
and OZ-9000 series Organizers
Backup, archiving, printing and emulation
of the Organizer on a computer.
9
173