Transferring Data - Sharp OZ-5500 Operation Manual

Transferring Data

There are several ways to transfer information – whether
specific entries or entire files – between the Organizer and
other information processing devices, including personal
computers and other SHARP Organizers. In this way, you
Transferable data and
direction of transfer
Transfer device
( : sent from 5500,
: received in 5500)
Another OZ-5500 Single entries, entire files/
Organizer, OZ-6500, applications
ZR-5000 and
OZ-9000 series
Organizer (See p.174
and p.176)
Personal computer Single entries, entire files/
(See p.180) applications
* Depending upon the SHARP or third-party software you are using, some features and capabilities may vary.
The auto power off function (see p.50) is disabled in
all transfer modes.
When transferring data from other models, only entries in a
mode (application) supported on the OZ-5500 Organizer
can back up your information to guard against losing it, or
copy information so that you or someone else can work
with it on another device. A summary of transfer devices,
transferable data, and tasks to which a transfer device is
most suited is provided in the table below.
Peripherals required
None for infrared transfers;
CE-315L for cable transfers
Software* + CE-IR2 or
compatible Organizer link
cables or CE-137T + RS-232C
interface cable
can be sent. However, the Notebook application on some
other models corresponds to the Memo application on the
OZ-5500 Organizer.
Most suitable task
Exchanging data with other OZ-5500
Organizers, OZ-6500, ZR-5000 and
OZ-9000 series Organizers
Backup, archiving, printing and emulation
of the Organizer on a computer.
9
173