Optical Digital Audio-Out Connector - Fujitsu P2110 Manual

Optical Digital Audio-Out Connector

The optical digital audio-out connector allows you to download digital audio to MiniDisc recorders. It
uses SPDIF (Sony Philips Digital Interface) format. Use the following setting when using the digital
audio-out connector.
Critical Point
Before using the SPDIF function, make sure that WinDVD software is installed on your
system.
Certain older CDs and DVDs will not work in conjunction with the SPDIF connector.
1 Connect the MiniDisc recorder or external speaker to the Optical Digital Audio-Out Connector.
2 Insert the disk you want to play in the DVD/CD-RW tray.
3 Click on Start —> Programs —> InterVideo WinDVD. (In Windows XP systems, you can go
directly from Start to InterVideo WinDVD.)
4 When the WinDVD interface appears, click on the Properties icon in the bottom of the display (it
looks like a wrench).
5 Click on the Audio tab and select Enable S/PDIF output.
6 Click on the Apply button.
WARNING
Do not look into the connector. There may be a beam coming out from the SPDIF connector,
so do not look into the connector when inserting the cable, or you can damage your eyesight.
Critical Point
The frequency of the digital sound output from the SPDIF output connector is fixed to 48KHz.
If a sampling rate convertor is not installed in your connecting digital electronic device (e.g.,
MD player), recording is not possible. Please see the user manuals for the electronic devices
for further details.
The sound recorded through connecting a digital electronic device (e.g., MD player) to the
SPDIF output connector cannot be used as digital output.
All output data from the SPDIF output connector has copyright protection information included.
Please be careful, as there are several types of cables for connecting a digital electronic
device (e.g., MD player) to the digital audio-out connector, depending on the connector type.
The connector on your computer is an Optical Mini Plug (3.5mm diameter mini plug)
57