Download Print this page
Fujitsu LifeBook P7120D Assembly Manual
Fujitsu LifeBook P7120D Assembly Manual

Fujitsu LifeBook P7120D Assembly Manual

Hide thumbs Also See for LifeBook P7120D:

Advertisement

Quick Links

LifeBook P7120D
ESD Precautions are required when working on this LifeBook computer.
1. Connect the left microphone
cable to the microphone PCB.
3. Secure the PCB with 1 screw.
Assembly
2. Insert them both into the rear
cover of the display.
4. Insert the right microphone into
the cover.

Advertisement

loading

Summary of Contents for Fujitsu LifeBook P7120D

  • Page 1 LifeBook P7120D Assembly ESD Precautions are required when working on this LifeBook computer. 1. Connect the left microphone 2. Insert them both into the rear cable to the microphone PCB. cover of the display. 3. Secure the PCB with 1 screw.
  • Page 2 5. Route the right antenna cable 6. Insert the hinge into the cover through the hinge. and secure it with 1 screw. 7. Connect the cable bundle to the 8. Connect the cable bundle to the right microphone. microphone PCB. 9.
  • Page 3 13. Cover the connection with tape. 14. Lay the LCD into the rear cover. 15. Secure the LCD with 4 screws. 16. Place the front cover onto the display. 17. Press firmly around the perimeter 18. Insert 4 screws into the front of to snap it into place.
  • Page 4 21. Place the SD card PCB into the 22. Insert the DC connector. lower case. 23. Place the SD and DC bracket 24. Secure the bracket with 1 screw. over them. 25. Insert the RJ45 connector. 26. Insert the RJ11 connector. 27.
  • Page 5 29. Secure it with 1 screw in each of 30. Insert the video bracket into the the 2 hinges. lower case. 31. Route the cables under the 32. Secure the bracket with 3 bracket. screws. 34. Insert the factory installed RAM 33.
  • Page 6 37. Lower the system board into 38. Connect the speaker cable to place. the system board. 39. Connect the display cable to 40. Connect the external video the system board and tape it down. ribbon cable to the system board. 42.
  • Page 7 45. Press the daughterboard onto 46. Secure the daughterboard with the system board. 4 screws. 48. Place the WLAN card into its slot 47. Secure the system board with 2 on the bottom of the PC Card PCB. screws. 49. Connect the 2 antenna cables 50.
  • Page 8 53. Secure the right side USB 54. Secure the Bluetooth PCB to the connector to the metal shield with 1 shield with 2 screws. screw. 55. Tape down its cable. 56. Place the metal shield over the system board. 57. Insert 1 screw into the Bluetooth 58.
  • Page 9 62. Insert the GlidePoint button PCB 61. Connect the Bluetooth cable to into the upper case. the system board. 64. Connect the ribbon cable from 63. Place the plastic bracket over it the sensor to the button PCB. and secure it with 1 screw. 65.
  • Page 10 69. Secure the panel PCB with 2 70. Connect the keyboard cable to screws. the system board. 71. Turn the keyboard over and slide 72. Press the status panel cover into it into place. place. 73. Turn the LifeBook over and insert 74.
  • Page 11 78. Insert the upgradeable RAM 77. Secure the cover with 3 screws. compartment cover. 80. Slide the optical drive into its 79. Secure it with 2 screws. bay. 81. Insert the battery.