Fujitsu P2110 Manual page 55

Warm-swapping Batteries
To warm-swap batteries in your battery bay follow these easy steps:
1 Close any open files.
2 Put your notebook into suspend mode
3 Plug in an AC Adapter to ensure power is supplied to the system, or install a fully charged
modular battery in the Flexible Bay.
4 Slide the battery bay release buttons to open the bay.
5 Remove the battery from the bay.
6 Slide the new battery into the bay.
7 Close the bay and slide the battery bay release button back.
8 Press the Suspend/Resume button to return your notebook to normal operation.
Critical Point
If the Lithium ion battery connector is not fully seated, you may not be able to use your
notebook or charge your battery.
39