Fujitsu P2110 Manual page 67

8 Align the connector edge of the memory upgrade module, chip side up, with the connector slot
in the compartment.
9 Insert the memory upgrade module at a 45 o angle and press it firmly onto the connector.
10 Press the memory upgrade module down into the compartment until it locks underneath the
retaining clip. You will hear a click when it is properly in place.
11 Carefully flip the keyboard back into its original position, and slide it towards the front of the
unit until it is seated.
12 Replace the spacer panel you removed in step 4.
Installation of the new memory module is now complete.
13 Replace the screw you removed in step 3.
51