Sharp UX-465L Operation Manual page 76

Using TEL Mode
Answering with an extension
phone
1
Answer the extension phone when
it rings.
2
If you hear a soft fax tone, wait until
your fax responds (the extension
phone will go dead if it is connected
to your fax, or you will hear
pronounced, high-pitched tones if
the phone is connected to a
separate wall jack), then hang up.
Beep
3
If the fax doesn't respond, or if the
other party first talks to you and
then wants to send a fax, press 5,
*, and * on the extension phone
(only on a tone dial phone). This
signals the fax to begin reception.
Hang up.
5
74
Phone goes dead
or pronounced,
high-pitched tones
Comments:
Your fax will not accept the signal
to begin reception (5**) if a
document is loaded in its feeder.
If you have set the Fax Signal
Receive setting to NO, press 5, *,
and * on the extension phone to
begin reception.
Changing the number for
remote fax activation
If desired, you can use a number
other than 5 to activate fax reception
from an extension telephone. You
can select any number from 0 to 9.
1
Press these keys:
FUNCTION
TEL/FAX REMOTE #
2
Press a number from 0 to 9 .
1
3
Press the STOP key to return to
the date and time display.
STOP
4
Press 5
times
(Example)