Sharp UX-465L Operation Manual page 134

REMOTE OPERATION CARD
The card below is provided as a quick guide to remote operation. Please cut
the card out, fold it along the dotted line, and carry it with you when you go
out.
Remote Operation Guide
1. Call your fax from a touch-tone telephone, and
press # when the outgoing message begins.
2. Enter your remote code:
3. Press # .
4. After listening to your messages, you can
either hang up to save them, or enter one of
the commands on the reverse side.
# 2 1 off..............................
# 1 1 on..............................
* *
disconnect........
# 3 9 .......
#
#) (Tel.
# 0 9 ........
# 2 9 off..............................
# 1 9 on..............................
FUNCTION
# 3 8 .........................
# 2 8 .........................
# 1 8 .........................
MODES
Turn
Turn
MODE ONLY OGM •
quickly To
OGM transfer Record
number transfer New
Turn
Turn
TRANSFER •
mode TEL
mode FAX
mode TAD
RECEPTION FAX •
COMMANDS
.
*
4 Start..................................
OGM NEW A RECORDING
# 0 ...................................
*
# Start..................................
MEMO A RECORDING
# 3 3 .......... messages
# 3 ...... message single
MESSAGES
playback)
# 6 .. only messages
# 0 ..................................
# 5 forward......................
# 2 ..... backward/repeat
# 7 ................. messages
PLAYBACK
REMOTE
•
End
•
all Erase
Erase
ERASING •
stop (first
new Play
Stop
Skip
Move
Play
•