Sharp UX-465L Operation Manual page 14

Connections
Attaching the tray extension
and document support
Attach the paper tray extension.
Pull the paper release plate
forward. Insert the paper tray
extension horizontally into the
notches in the paper tray. Rotate
the paper tray extension up until it
snaps into place.
Attach the original document support.
Note: The original document support
has a top side and a bottom side. If
you cannot insert the tabs on the
support into the holes, turn the
support over.
12
Extension phone (optional)
If desired, you can connect an
extension phone to the TEL. SET
jack on the fax.
1
Remove the seal covering the TEL.
SET jack.
2
Connect the extension phone line
to the TEL. SET jack.