Sharp UX-465L Operation Manual page 40

Recording an Outgoing Message
5
When finished, press the STOP
key and then replace the handset.
STOP
6
Press the STOP key twice to return
to the date and time display.
STOP
To listen to the outgoing
message
To listen to the outgoing message,
follow Steps 1 through 4 of the above
procedure to select the message, and
then press the PLAY/SKIP key to
listen to it. To return to the date and
time display, press the STOP key
twice. Note that the general outgoing
message cannot be erased. If you
need to change it, simply repeat the
recording procedure. (The Transfer
message can be deleted by pressing
the DELETE key after selecting it as
explained above.)
Note: If an extension phone is
connected to the UX-465L, an
outgoing message cannot be
recorded, played, or deleted while the
extension phone is being used (while
LINE IS IN USE appers in the
display).
38
STOP