Sharp UX-465L Operation Manual page 117

MEMORY IS FULL
MEMORY PRINTING
NO DATA
NO SERVICE
NO # STORED
OFF HOOK
ON HOOK DIAL
OUT OF PAPER
OVER HEAT
PAPER JAMMED
READY TO SEND
The memory is full. This may occur during fax reception
if too much data is received before the pages can be
printed out. If faxes have been received to memory
because printing is not possible (an additional message
will indicate the problem), resolve the problem so that
printing can continue (see Substitute Reception to
Memory on page 78). If you are attempting to transmit
from memory, see If the memory becomes full on page
96.
The fax is preparing to or printing out a document from
memory.
This appears if you attempt to search for an automatic
dialing number when none have been stored.
This appears if you haven't registered with OpenLCR
and press the FUNCTION key and 7.
You have tried to dial or clear a Rapid Key or Speed Dial
number that hasn't been programmed (a full number
hasn't been assigned to it).
This appears if you forgot to replace the handset after
using it to dial and send a fax. Replace the handset or
press the STOP key to clear the message.
The SPEAKER key has been pressed and the fax
machine is waiting for you to dial.
You are out of printing paper (or the paper release plate
is open). Load paper as explained in Loading Printing
Paper on page 17.
The print head has overheated. Operation can be
continued after it cools.
The printing paper is jammed. See the following section,
Clearing Paper Jams .
A document has been loaded and the fax machine is
waiting for you to begin faxing or copying.
Messages and Signals
115