Using Auto Reception Mode; Using Manual Reception Mode - Sharp FO-DC535 Network Manual

Receiving Faxes

Using AUTO Reception Mode

In AUTO reception mode, the machine automatically answers all calls on one
ring and receives incoming faxes.
♦
You can change the number of rings on which the machine answers calls
by changing Option Setting 2 (see page 202).
♦
If you pick up an extension phone before the machine answers, you can talk
to the other party and/or receive a fax as explained in the following section,

Using MANUAL Reception Mode.

Using MANUAL Reception Mode
1
When the machine rings, answer the
call on an extension phone connected
to the same line.
2
If you hear a fax tone, press
•
If the other party first speaks with you, press
your START key before the sender presses their Start key.)
•
If there is a document in the feeder, remove the document before pressing
START/
(otherwise the document will be transmitted).
ENTER
3
When RECEIVING appears in the
display, hang up.
68
START/
on the machine.
ENTER
START/
ENTER
after speaking. (Press