Receiving Faxes - Sharp FO-DC535 Network Manual

Receiving Faxes

The machine has two modes for receiving faxes:
AUTO mode:
Select this mode when you only want to receive faxes on the line connected to
the machine. The machine will answer all calls automatically and receive
incoming faxes.
MANUAL mode:
Select this mode when you have an extension phone connected to the same
line as the machine and you want to receive both faxes and voice calls. All
calls, including faxes, must be answered by picking up the extension
phone.
Setting the reception mode
The reception mode is initially set to AUTO. To change the reception mode,
follow the steps below.
♦
If you have the dual-line option, use the procedure on page 73 to select the
reception mode. Note that the reception mode can only be selected for Line
1 (Line 2 is fixed at AUTO).
1
MENU
Press
RECEIVE MODE is selected in the
display.
2
START/
Press .
ENTER
3
Press or
RECEPTION.
4
START/
Press .
ENTER
. Make sure that
to select AUTO RECEPTION or MANUAL
Receiving Faxes
Display:
MENU MODE
1:RECEIVE MODE
2:LISTING MODE
3:ENTRY MODE
RECEIVE MODE
1 = AUTO RECEPTION
2 = MANUAL RECEPTION
67