6
Press the START key to send the
document through memory, or the
DOCUMENT key to send the
document directly from the feeder.
Relay Broadcast
The FO-5700 can also act as a relay station. It will receive a document
from a fax machine requesting a relay transmission, and automatically
broadcast it to the stations that the requesting machine specifies.
To enable a fax machine to request a relay transmission, you must first
enter its fax number in the Relay Passcode List. Follow the steps
below to enter or clear a fax number.
When your fax receives a relay request from another fax machine,
RCVD RELAY REQUEST will appear in the display.
If the telephone billing function is turned on, the fax machine can-
not act as a relay station.
To clear a fax number from the Relay Passcode List, you need to
know the 2-digit number which identifies it. You can check this
number by printing out the Passcode List (see Chapter 7).
1
Press these keys:
The display will show:
4:RELAY PASSCODE
1=SET, 2=CLEAR
Relay Request
START
DOCUMENT
or
RELAY
U
4
85