Sharp FO-4700 Operation Manual page 52

Sending a Fax by Automatic Dialing
Speed Dialing
If the number you want to dial has been programmed in a Speed Dial
number, you can dial it by pressing the SPEED DIAL key and then
entering the Speed Dial number.
1
Load the document(s).
SEND READY will appear in the
display.
Set the resolution and/or contrast if
desired.
To send the document ahead of
other documents waiting for
transmission, press the PRIORITY
key.
To send the document directly from
the feeder (not through memory),
press the DOCUMENT key.
2
Press the SPEED DIAL key and then
enter the Speed Dial number by
pressing the numeric keys.
If you enter less than 2 digits for the
Speed Dial number on the FO-
4700/FO-5550, or 3 digits on the
FO-5700, press the START key to
complete the entry.
50
RESOLUTION
PRIORITY
DOCUMENT
SPEED DIAL
1
Example: Speed Dial 1
CONTRAST
Q