Checking copy jobs in memory
You can display the status of copy jobs in memory by following the
steps below. You can also cancel copy jobs with this procedure.
1
Press the MEM. STATUS key (flip
up the Rapid Key overlay) and then
the 1 key.
COPY STATUS will appear in the
display.
2
Press the # key or the * key to scroll
through the list of copy jobs. The time
the original was scanned into memory
will appear in the display, together
with the 3-digit memory number
assigned to the job. To cancel a copy
job, press the CLEAR key and then
the START key while the copy job
appears in the display.
3
When you have finished checking the
list, press the STOP key twice to
return to the date and time display.
Making Copies
MEM.STATUS
1
W
or
STOP
STOP
67