Table of Contents
Advertisement
Coil Reversal (see Fig. 17)
Do not reverse coils having vent fittings (except
36SL,SM,SC,ST). To reverse coils without vent fittings:
1.
Remove sheet metal screws fastening condensate pan to
coil.
2.
Remove sheet metal screws holding coil to unit.
3.
Reverse coil end-to-end.
Reverse coil in horizontal plane on 36SL,SM,SC,ST
units.
4.
Reassemble coil to unit; re-install condensate pan.
© Carrier Corporation 2018
Manufacturer reserves the right to discontinue, or change at any time, specifications or designs without notice and without incurring obligations.
Catalog No. 04-53360009-01
Printed in U.S.A.
Form 36S-1SI
Pg 8
Fig. 17 — Coil Reversal
9-18
Replaces: 36R,S-1SI
Advertisement
Table of Contents
