Installing The Software; Using The Machine With A Usb Connection - Sharp AL-1651CS Operation Manual

INSTALLING THE SOFTWARE

• If you need to use a different connection method after installing the
Note
• In the following explanations it is assumed that the mouse is
• The scanner feature only works when using a USB cable.
• If an error message appears, follow the instructions on the screen to
• When installing Sharpdesk, a minimal version of Internet Explorer

Using the machine with a USB connection

1
The USB cable must not be connected to the machine. Make
sure that the cable is not connected before proceeding.
If the cable is connected, a Plug and Play window will appear. If this
happens, click the "Cancel" button to close the window and disconnect the
cable.
Note The cable will be connected in step 15.
2
Insert the CD-ROM into your computer's CD-ROM drive.
3
Click the "start" button, click "My Computer" (
double-click the CD-ROM icon (
In Windows 98/Me/2000, double-click "My Computer", and then double-click
the CD-ROM icon.
4
Double-click the "setup" icon (
If the language selection screen appears after you double click the
Note
"setup" icon, select the language that you wish to use and click the
"Next" button. (Normally the correct language is selected
automatically.)
5
The "SOFTWARE LICENCE" window will appear. Make sure
that you understand the contents of the software licence, and
then click the "Yes" button.
6 Read the "Readme First" in the "Welcome" window and then
click the "Next" button.
42
software using a USB or network connection, you must first uninstall
the software (p.79) and then install it using the new connection
method.
configured for right hand operation.
solve the problem. After the problem is solved, the installation
procedure will continue. Depending on the problem, you may have to
click the "Cancel" button to exit the installer. In this case, reinstall the
software from the beginning after solving the problem.
5.01 will be installed on your computer if your computer does not
currently have Internet Explorer version 4.01 or later.
), and then
).
).