Using The Scanner Mode; Scanning Using The Keys On The Machine - Sharp AL-1651CS Operation Manual

USING THE SCANNER MODE

The procedure for placing the original is the same as for copying. See "NORMAL
COPYING" (p.24).
Scanner mode cannot be used at the following times:
Note
• A misfeed has occurred (paper misfeed or original misfeed in the
RSPF).
• The user programs are being used.
• The tray paper size is being set.
• The machine is being used in copy mode.
• The front cover or side cover is open.

SCANNING USING THE KEYS ON THE MACHINE

When scanning is performed by this method, the application that has been set in
Button Manager will automatically start and the scanned image will be pasted into
the application.
If the machine is in copy mode, press the [MODE SELECT] key to
Note
switch to scanner mode and clear the previously set copy settings.
Scanning from the operation panel of the machine
1
Press the [MODE SELECT] key to select
scanner mode.
The "SCAN" indicator lights up to indicate that
scanner mode is selected.
2
Place the original. (p.24)
3
Press the [
select the desired Button Manager scan
menu setting.
4 Press the [START] key (
Scanner mode remains selected after scanning is finished. (To change
Note
to a different mode, use the [MODE SELECT] key.)
] key ( ) or [ ] key (
) to begin scanning.
AL-1651CS
) to
SCAN USING:
SC1:
6
61