Sharp AL-1651CS Operation Manual page 53

11
The printer or printers
connected to the network
will be detected. Click the
printer to be configured
(the machine) and click
the "Next" button.
If the machine's IP address cannot be found, make sure the machine is
Note
powered on, make sure the network cable is connected correctly, and
then click the "Search" button.
12
In the window for setting
the destination print port
name, make sure that
":lp" appears at the end of
the IP address and click
the "Next" button.
Any name can be entered in "Printer Port Name" (maximum of 38
Note
characters).
13
A window appears to let
you check your entries.
Make sure that the entries
are correct and then click
the "Finish" button.
If any of the entries are
incorrect, click the "Back"
button to return to the
appropriate window and
correct the entry.
SET UP THE SOFTWARE
5
51