Sharp AL-1651CS Operation Manual page 84

TROUBLESHOOTING AND MAINTENANCE
2 Gently remove the misfed paper
from under the fusing unit as shown
in the illustration. If the paper cannot
be removed, proceed to "C: Misfeed
in the transport area".
The fusing unit is hot. Do not touch the fusing unit when
Warning
removing misfed paper. Doing so may cause a burn or other
injury.
• Do not touch the surface of the drum (green portion) of the drum
Caution
• Do not remove the misfed paper from above the fusing unit. Unfixed
3
Raise the fusing unit release lever and then close the side
cover by pressing the round projections near the side cover
open button. The error indicator will go out and the ready
indicator will light up.
C: Misfeed in the transport area
1 Lower the fusing unit release lever.
See "B: Misfeed in the fusing area" (p.81).
2
Open the front cover.
To open the front cover, see "INSTALLING THE TD CARTRIDGE" (p.14).
3
Rotate the roller rotating
knob in the direction of the
arrow and gently remove the
misfed paper from the exit
area.
82
cartridge when removing the misfed paper. Doing so may cause
smudges on copies.
toner on the paper may stain the paper transport area, resulting in
smudges on copies.
Roller rotating
knob