User Settings; User Programs - Sharp AL-1651CS Operation Manual

7 Chapter 7

USER SETTINGS

The user settings allow you to customize machine settings to better meet your
needs.

USER PROGRAMS

The user settings consist of the following items.
To change the user program settings as explained in "SELECTING A SETTING FOR
A USER PROGRAM" (p.69).
Copy mode
Program
Program name
number
1 AUTO CLEAR
2 PREHEAT MODE
3 AUTO SHUT-OFF
64
Setting codes
(factory default
setting appears
in bold)
• Auto clear time automatically
returns the copy settings to
1: 10 SEC.
the initial settings (p.16) if no
2: 30 SEC.
keys are pressed for a preset
3: 60 SEC.
period of time following the
4: 90 SEC.
end of a copy job.
5: 120 SEC.
• This program is used to select
6: OFF
the period of time. Auto clear
time can also be disabled.
• This function automatically
switches the machine to a low
power consumption state if
the set duration of time
elapses without the machine
1: 1 MIN.
being used when the power is
2: 5 MIN.
on. The power save indicator
3: 30 MIN.
4: 60 MIN.
lights up, however, the keys
5: 120 MIN.
on the operation panel can be
6: 240 MIN.
used. Normal operation
automatically resumes when
a key on the operation panel
is pressed, an original is
placed, a print job is received.
• Use this setting to enable or
1: ON
disable auto power shut-off
2: OFF
mode.
Explanation