Connecting A Usb Cable - Sharp AL-1651CS Operation Manual

SET UP THE SOFTWARE
17
Begin installation of the printer driver.
"SHARP AL-XXXXCS" will appear in the "Found New Hardware Wizard"
dialog box. Select "Install the software automatically (Recommended)" and
click the "Next" button. Follow the on-screen instructions.
If you are running Windows 2000/XP and a warning message appears
Caution
regarding the Windows logo test or digital signature, be sure to click
"Continue Anyway" or "Yes".
18
Follow the instructions in the Plug and Play screen that
appears in your version of Windows to begin the installation.
This completes the installation of the software.
• If you installed Button Manager, set up Button Manager as explained in "SETTING
UP BUTTON MANAGER" (p. 55).

Connecting a USB cable

Follow the procedure below to connect the machine to your computer.
A USB cable for connecting the machine to your computer is not included with the
machine. Please purchase the appropriate cable for your computer.
• USB is available with a PC/AT compatible computer that was
Caution
• Do not connect the USB cable before installing the MFP driver. The
• If the machine will be connected using a USB 2.0 port of your
Note
• The machine's USB port will transfer data at the speed specified by
• To obtain the fastest USB 2.0 data transfer speed, "USB2.0 MODE
• Use the machine's "HI-SPEED" mode only when using a computer
• Even when the Microsoft USB 2.0 driver is used, it may not be
• Connection is also possible using a USB 1.1 port on your computer.
46
originally equipped with USB and had Windows 98, Windows Me,
Windows 2000 Professional, Windows XP Professional or Windows
XP Home Edition preinstalled.
USB cable should be connected during installation of the MFP driver.
computer, please purchase a USB cable that supports USB 2.0.
the USB 2.0 (Hi-Speed) only if the Microsoft USB 2.0 driver is
preinstalled in the computer, or if the USB 2.0 driver for Windows
2000 Professional/XP that Microsoft provides through its "Windows
Update" Web page is installed.
SWITCH" in the machine's user programs must be set to "HI-SPEED".
For more information, see "USER PROGRAMS" (p.68).
that is running Windows 2000/XP.
possible to obtain full USB 2.0 speed if a PC card supporting USB 2.0
is used. To obtain the latest driver (which may enable a higher
speed), contact the manufacturer of your PC card.
However, the specifications will be USB 1.1 specifications
(Full-Speed).