To Change Temperature Setting; To Change Air Flow Direction; Exhaust - Sharp AF-R100EX Installation And Operation Manual

HOW TO OPERATE

TO CHANGE TEMPERATURE SETTING

SLEEP COOL TEMP
SELECTOR
TEMPERATURE setting pad
NOTES:
• In fan only (HIGH FAN, MED FAN, LOW FAN) operation, the temperature display will go off and the
temperature setting cannot be changed.
• In cases of power outages or when the unit is disconnected; when the power is restored or the unit is
plugged in, the unit and display will return to the preset conditions of 74°F and HIGH COOL. The unit will
not automatically turn back on. The user must touch POWER ON/OFF to resume operation.

TO CHANGE AIR FLOW DIRECTION

The horizontal louvers are used to adjust the UP/DOWN direction of air flow, and the vertical louvers are used
to adjust the LEFT/RIGHT direction of air flow for uniform and efficient cooling of the room.
Horizontal louvers
Adjust UP/DOWN air flow

EXHAUST

If air in your room is stale, set the EXHAUST
lever to the OPEN position. This will exhaust
stale air to the outside. The EXHAUST lever
should normally be kept in the CLOSED position
during cooling for maximum efficiency.
12
F
hr
TIMER ENERGY POWER
SAVER
ON/OFF
ON/OFF
During cooling operation
Touch the TEMPERATURE setting
pad to adjust the temperature set-
ting.
Lower temp.
---
• Temperature can be set within the range
of 64°F to 86°F.
• Display will change as you touch
the pad.
Vertical louvers
Adjust LEFT/RIGHT air flow
CLOSED
Raise temp.
---
Vertical louver
levers
EXHAUST Lever
OPEN