To Change Temperature Setting; To Change Air Flow Direction - Sharp AF-08ERL Installation And Operation Manual

HOW TO OPERATE

TO CHANGE TEMPERATURE SETTING

NOTE:
• In fan only (HIGH FAN, MED FAN, LOW FAN) operation, the temperature display will go off and
the temperature setting cannot be changed.
• In cases of power outages or when the unit is disconnected; when the power is restored or the
unit is plugged in, the unit and display will return to the preset conditions of 74°F and HIGH
COOL. The unit will not automatically turn back on. The user must touch POWER ON/OFF to
resume operation.

TO CHANGE AIR FLOW DIRECTION

The horizontal louvers are used to adjust the UP / DOWN direction of air flow, and the vertical
louvers are used to adjust the LEFT / RIGHT direction of air flow for uniform and efficient cooling
of the room.
Horizontal louvers
Adjust UP/DOWN air flow
12
During cooling operation
Touch the TEMPERATURE setting
pad to adjust the temperature set-
ting.
Lower temp.
---
• Temperature can be set within the range
of 64°F to 86°F.
• Display will change as you touch
the pad.
Vertical louvers
Adjust LEFT/RIGHT air flow
Raise temp.
---
Lever