Preparation; Filter Installation - Sharp FP-P35CX Operation Manual

PREPARATION

FILTER INSTALLATION

To maintain the quality of the filter, that is installed in the main unit within the
plastic bag. Be sure to remove the filter from the plastic bag before using the unit.
Remove the filters
1
1
Remove the
Front Panel.
Pull the bottom of
the Front Panel.
Front Panel
Pull out the Filter Frame
2
and remove the Pre-Filter,
and the True HEPA Filter.
3 Remove the True HEPA
Filter (white) from the plastic
bag.
Pre-Filter
True HEPA Filter
Filter Frame
Be sure to remove the power plug from the wall outlet.
Filter Frame
Pre-Filter
True HEPA Filter
2 Install the filters
1
Place the True HEPA Filter
within the Filter Frame.
Please make sure that the True
HEPA Filter is placed in proper
orientation.
Do not install the filter backwards or
the unit will not operate properly.
Filter Frame
2
Place the Pre-filter.
Insert the tabs of
the pre-filter into
the associated
holes of the Filter
Frame.
3
Mount the Filter Frame to the
main unit.
Filter Frame
4 Fix the Front Panel to the main
unit.
5
Fill in the usage
start date on the
Date Label.
E-7
True HEPA Filter
Tabs (4 places)
Holes
Main unit
Date Label