Operation; Main Unit Operation - Sharp FP-P35CX Operation Manual

OPERATION

MAIN UNIT OPERATION

1
Power ON/OFF Button
• Used to start operation (short beep) and stop operation (long beep)
• Fan Speed Indicator Light turn on/off.
• Unless the power cord is unplugged, the operation starts in the previous mode the
unit was operated in.
2 MODE Selection Button
• The operation mode can be switched.
AUTO operation
The fan speed is automatically switched
(HIGH*, MEDIUM, SILENT) depending
on the amount of impurities in the air.
The sensor detect the impurities for ef-
ficient air purification.
QUICK CLEAN operation
The unit will operate at HIGH* fan speed
for 15 minutes, then will operate at Auto
operation.
The operation mode is effective when
quick removal of impurities in the air is
desired.
POLLEN mode operation
The unit will operate at HIGH* fan speed
for 10 minutes, then will alternate
between MEDIUM and HIGH* for 20
minutes.
10 minutes: HIGH fan speed
20 minutes: MEDIUM fan speed
20 minutes: HIGH fan speed
Clean Filter Indicator Light
Clean Sign Light
E-8
Main Unit Controls
• AUTO
• QUICK CLEAN
• POLLEN
• SILENT
• MEDIUM
• MAX
MODE Selection Button
Power ON/OFF Button
MAX operation
The unit will operate at a fan
speed of MAX.
MEDIUM operation
The unit will operate at a fan
speed of MEDIUM.
SILENT operation
The unit will operate quietly
using minimal air intake.
* HIGH fan speed is an interme-
diate speed between MEDIUM
and MAX.