Using Your Remote Control; Remote Starting Your Vehicle; Remote Start Shutdown; Entering The Vehicle While It Is Running Via Remote Start - Code Alarm PROFESSIONAL SERIES Owner's Manual

Using Your Remote Control

Remote Starting Your Vehicle

To activate the remote start function, press and release the
seconds. The system will sound, the parking lights will flash 1 time and the system
will check the vehicle to ensure it is safe to start. If all safety parameters are correct,
the vehicle will start. The vehicle's parking lights will turn on (or flash depending on
system settings) as a visual indication that the vehicle has started and is running.
If your vehicle stalls or does not start, the system will pause 5 seconds, then try
3 more times to start the vehicle (a total of 4 attempts). The system will pause 5
seconds between each start attempt.

Remote Start Shutdown

Press and hold the
vehicle's brake will also shutdown the remote start.
Entering the Vehicle while it is Running via Remote Vehicle Start
1. Unlock the vehicle's doors. (Using the vehicle's factory remote)
2. Enter the vehicle. DO NOT PRESS THE BRAKE PEDAL!
3. Insert the key into the ignition switch and turn to the ON or RUN
position.
4. Press the brake pedal. The remote vehicle starter will disengage and
the vehicle will operate normally.
Preheating or Precooling the Vehicle's interior
Before exiting the vehicle, set the temperature controls to the desired setting and
operation. After the system starts the vehicle, the heater or air conditioner will
activate and heat or cool the vehicle's interior to your setting.
caSECRS / ca1BTW6 4280931 Owners rev A.
button for 3 seconds to turn the vehicle off. Pressing the
button 2 times within 2
3