Using Your Remote Control; Using The Keyless Entry; Two Stage Door Unlock (Optional); Activating Trunk Release (Optional) - Code Alarm CA 5055 Owner's Manual

Using Your Remote Control

Using the Keyless Entry

The button is used to lock the vehicle's doors, the
vehicle's doors. To lock or unlock the doors simply press and release the desired
function button one time. For your convenience, the parking lights will flash once when
the doors are unlocked and twice when the door are locked.
NOTE: The system is equipped with a feature called Silent Choice. If enabled, the
system requires a second press of the
unlocking response from the vehicle. If your system is set up for 2 step unlock, a third
press of unlock will activate the audible response.

Two Stage Door Unlock (Optional)

If this feature is enabled on your system, pressing the
only the driver's door. Press
doors.
Activating the Trunk Release Feature (Optional)
If this feature is enabled on your system, pressing and holding the
seconds will open the vehicle's trunk or hatch.

Using the Progressive Car Finder Feature

Press the
and sound 5 times at low volume, increasing in volume each time the button is
pressed.
Using the Personal Protection Alarm (Panic)
Press and hold the
During panic mode, the normal function of the transmitter buttons will be suspended.
The transmitter's
option is installed). To stop the alarm, press and hold the
again for 3 seconds. The system will automatically stop after 30 seconds.
2017 Voxx Electronics Corporation. All rights reserved.
button to locate your vehicle. The system will flash the parking lights
button for 3 seconds to activate the personal protection alarm.
and buttons can be used to lock and unlock the door (if the
or button to activate an audible locking/
again within three seconds to unlock the remaining
button is used to unlock the
button one time will unlock
button for 3
button on the transmitter
3