Connecting The Thunderbolt 3 Adapter - cable matters Thunderbolt 107016 User Manual

3.3 Connecting the Thunderbolt 3 Adapter

1) Connect the Adapter to a Thunderbolt 3 port on your computer
2) Wait up to 20 seconds while any additional drivers are automatically installed
3) Windows computers must approve the Adapter with the Intel Thunderbolt software for
the initial connection
4) Mange the settings of connected Thunderbolt devices from
the Thunderbolt software in the Windows taskbar
Troubleshooting Tips
Unplug the Adapter, reboot the computer
•
and reconnect
Connect a USB device if the Adapter is not
•
recognized
Check with the computer manufacturer for
•
updated BIOS and drivers for Windows
Note: This Thunderbolt Adapter is NOT
•
compatible with a USB-C only host computer
Thunderbolt™ 3 Multiport Adapter with Dual HDMI®
www.cablematters.com
4