Table of Contents
Advertisement
Chapter 5: "ACTUAL VALUES" menu
5. "ACTUAL VALUES" menu
5.1
Actual values 1: CURRENT DATA
ACTUAL VALUES 1
CURRENT DATA
GROUND CURRENT
0.00 Amp
END OF PAGE
5.2
Actual values 2: LAST TRIP DATA
ACTUAL VALUES 2
LAST TRIP DATA
LAST TRIP CAUSE
NO TRIP DATA
GROUND CURRENT
0.00 Amp
END OF PAGE
5.3
Actual values 3: EVENTS
ACTUAL VALUES 3
EVENTS
EVENT 10
EVENT CAUSE
CURRENT PROTECTION RELAY - IPR-D
This PAGE includes the actual values of the system ground current.
It indicates true RMS of the ground current.
Last LINE of PAGE 1. Press LINE or ▲PAGE, to pass to the first line of PAGE 2.
This PAGE includes the electrical variables values at the latest trip made by IPR-D;
these variables can be displayed immediately after the trip.
For example:
After the overcurrent trip, the ground current can be displayed.
The data are stored even in case of no control power to the relay.
It indicates that, after pressing LINE key, the cause of the latest trip will be displayed.
⇒
STORE
It displays date and time of the latest trip.
It displays ground current rating when the trip occurred.
Last LINE of PAGE 2. Press LINE or ▲PAGE, to pass to the first line of PAGE 3.
It displays the events [→ Chapter 7 – EVENT RECORDER].
In case of no control power supply, the cause, the electrical variables values related to
each event and the moment of the fault [future function] would not be lost.
It indicates the number of the event and its cause.
VALUE
or VALUE
⇒
STORE
It displays date and time
⇒
LINE
It displays ground currents RMS values.
⇒
LINE
It displays the message for the clearing of events.
YES
NO
STORE ⇒
5.1
⇒
It displays the latest events or previous ones.
⇒
events clearing
⇒
events are not cleared
to confirm the selection
Manual P/N: IPR-D GBM 01/09/2006
Advertisement
Table of Contents
