Table of Contents
Advertisement
Chapter 4: "SETPOINTS" Menu
COM1 RS-232
BAUDRATE 9600
COM2 RS-485
BAUDRATE 9600
COM3 RS-485
BAUDRATE 9600
END OF PAGE
4.10 Setpoint page 10: CALIBRATION MODE
SETPOINT PAGE 10
CALIBRATION MODE
RELAYS TEST
NONE
DIGITAL INPUT 1
DEACTIVATED
DIGITAL INPUT 2
DEACTIVATED
DIGITAL INPUT 3
DEACTIVATED
END OF PAGE
CURRENT PROTECTION RELAY - IPR-D
RANGE:
.........................................................................
Select the Baud rate.
RANGE:
.........................................................................
Select the Baud rate.
RANGE:
.........................................................................
Select the Baud rate.
Last LINE of PAGE 9.
Press LINE or ▲PAGE, to pass to the first line of PAGE 10.
This PAGE allows testing the operation of the inputs and the output relays.
RANGE:
.......................................................................
Select the involved output for testing the correct operation of the output relays by using
VALUE
and VALUE
condition.
RANGE:
............................................................................
This message allows controlling the status (DEACTIVATED or ACTIVATED) of external
contact DIGITAL INPUT 1.
RANGE:
............................................................................
This message allows controlling the status (DEACTIVATED or ACTIVATED) of external
contact DIGITAL INPUT 2.
RANGE:
............................................................................
This message allows controlling the status (DEACTIVATED or ACTIVATED) of external
contact DIGITAL INPUT 3.
Last LINE of PAGE 10.
4.9
1200; 2400; 4800; 9600; 19200
1200; 2400; 4800; 9600; 19200
1200; 2400; 4800; 9600; 19200
TRIP; AUX1; AUX2; AUX 3; ALL
and press STORE. Press RESET to return to the normal
DEACTIVATED; ACTIVATED
DEACTIVATED; ACTIVATED
DEACTIVATED; ACTIVATED
Manual P/N: IPR-D GBM 01/09/2006
Advertisement
Table of Contents
