Table of Contents
Advertisement
Chapter 2: Installing
2. Installing
2.1
IDENTIFICATION
On the plate on the rear side of the IPR-D you can find the following information:
ORION ITALIA
PIACENZA 29100
TEL.: 0523 – 591161
FAX: 0523 – 593898
www.orionitalia.com
MADE IN ITALY
MODEL: IPR-D
SERIAL No.
MFG. DATE
GROUNG CTs (SEC)
2.2
UNPACKING
The shipping container includes:
- IPR-D relay
- the fixing elements
As soon as you receive the unit, inspect it and inform ORION ITALIA of any damage.
If reshipment is required, the original container and packing should be used.
2.3
MOUNTING
The mounting should be carried out as follows:
1. Install the relay in a place where the humidity and temperature are those for which it has been designed [
1.7 – "Specification"] and away from current conductors and sources of strong magnetic fields.
2. Put the relay inside a panel and place it so that the keypad is easily accessible and the display is visible.
3. Make a cutout in the panelboard of 137 x 137 mm [
provided with the relay
CURRENT PROTECTION RELAY - IPR-D
Manufacturer
Manufacturer's address
Internet
Model name
Serial number of the relay
Date of manufacture
Ground CT installed: 1 A or 5 A
- this instruction manual
- the Test certificate (if required)
.
FRONT VIEW
REAR VIEW
Figure 2.1 –IPR-D overall dimensions
Fig. 2.1] and fix the relay by using the fixing elements
SIDE VIEW
PANEL CUTOUT
2.1
Manual P/N: IPR-D GBM 01/09/2006
§
Advertisement
Table of Contents
