Care Of Your Steam Mop - Shark S3501C Owner's Manual

Care of Your Steam Mop

AFTER USE AND STORAGE
1 When you have finished using
the steam mop, and your floors
are clean, unplug the cord from
the outlet and move it into an
upright position. Let the unit cool
2-3 minutes and release steam by
pumping the handle several times
before removing the micro-fiber
cleaning pocket from the mop head.
1
2
2
Remove the micro-fiber cleaning
pocket by releasing the quick
fasteners and using the lavender
loop on the side of the pocket,
avoiding contact with the hot pocket
or dirt. Then empty the water tank.
IMPORTANT: Be very careful
because the cleaning pockets can
get very hot from the steam, so use
caution when removing them. Let
the unit cool 2-3 minutes.
 TOLL FREE: 1-866-826-6941
3
3 To store the Shark
® Steam Mop
hanging up; first remove the head
(after it has cooled and the steam
has been released) then hang on a
large hook.
NOTE: If you want to store it
standing upright then make sure
it's leaning against a wall for added
support and safety. Always store
your Steam Mop with the micro-fiber
pocket removed, away from children
or high traffic areas.
1
KEEPING YOUR MICRO-FIBER
CLEANING POCKET AS GOOD
AS NEW
1 We recommend washing your micro-
fiber pockets separately from other
fabrics to avoid picking up lint.
Only use liquid detergent.
(no powder detergent) Don't use
any fabric softeners or bleach.
Line dry or dry on a low dryer
setting.
2
2 If there are loose threads on the
pocket carefully cut the thread with
scissors. Don't pull on them or cut at
the base.
www.sharkcompany.com
English