Care Of Your Steam Mop - Shark S3901UKL Owner's Manual

Care of Your Steam Mop

fig. 28 fig. 30
AFTER USE AND STORAGE
1 When you have finished using the Handheld
Steamer, reattach it to the mop by first placing
the bottom of the Handheld Steamer into the
cradle of the mop housing. (fig. 28)
2 Then slide the top end of the Handheld Steamer
into the mop housing and snap into place.
NOTE: Make sure all attachments are removed
before reuniting the Handheld Steamer with the
Steam Mop.
3 If you have finished mopping, press the ON/
STEAM SETTING button until the LED light blinks
blue. This stops the unit from steaming. Unplug
the cord from the outlet and place the mop into
the upright position. Let the unit cool for 2-3
minutes.
Remove the cleaning pocket by releasing the
quick fasteners and using the lavender loop on
the side of the pocket, avoiding contact with the
hot pocket or dirt. (fig. 29)
16 www.lakeland.co.uk
fig. 29
fig. 31
4 Empty the water tank before storage. Remove the
water tank cap and empty the tank over a sink.
Replace the water cap. (fig. 30)
5 To store the Shark ® Lift-Away ™ Pro Steam
Pocket Mop hanging up, first remove the
®
head (after it has cooled and the steam has been
released) then hang on a large hook. (fig. 31)
6 Place the Direct Steam Nozzle on the storage clip
for easy accessability.
40°
fig. 32
fig. 33
CARE OF YOUR CLEANING POCKETS
1 We recommend washing your cleaning pocket
separately from other fabrics to avoid picking up
lint. For optimal cleaning performance pockets
may need to be washed up to (3) three times.
Only use liquid detergent (no powder
detergent). Do not use any fabric
softeners or bleach. Line dry. Do not tumble
dry. (fig. 32)
2 If there are loose threads on the cleaning pocket
carefully cut the thread with scissors. Do not pull
on them or cut at the base.(fig. 33)
IMPORTANT: The cleaning pocket may be very
hot from the steam. Use caution when removing.
Let the unit cool for 2-3 minutes.
ORDERING REPLACEMENT PARTS
To order additional parts and accessories, feel free
to contact us at:
Shark Customer Services
15 Mariner Court
Calder Park
Wakefield
WF4 3FL
Free phone 0800 862 0453
www.lakeland.co.uk
DECALCIFYING YOUR STEAM MOP
Calcium and mineral deposits can build up and
impact the performance of your steam mop
over time. To extend the life of your product we
recommend that you use distilled water.
fig. 34
CLEANING THE NOZZLE
NOTE: To prevent clogging, it is recommended
that you periodically clean the Direct Steam
Nozzle and the extension hose stem with the
cleaning tool provided or a paper clip.
1 Your Handheld Steamer should not normally
require cleaning, however, should you notice
a decrease in the steam output, it may be
necessary to remove mineral deposits built up
around the nozzles.
2 Unplug the cleaner from the electrical outlet.
3 Use the provided nozzle cleaner or a small
diameter stiff metal wire, such as a straightened
metal paperclip, and carefully insert the end of
the wire into the nozzle orifice. See illustration
above. (fig. 34)
4 Move the wire back and forth several times to
remove any deposits.
5 Plug in the appliance to the power outlet and
test steam output.
PART PART NO.
1 2 Cleaning Pockets XT3701UKL
www.lakeland.co.uk 17