Sunis WireFree II io sensor Contents Description Program the sensor on the motor with a 1-way transmitter Program the sensor on a Connexoon io Program the sensor on a TaHoma Operating mode “Standard” operating mode “My” operating mode Switch from “Standard” to “My” operating mode Switch from “My”...
Sunis WireFree II io sensor Description Wall bracket Green LED (prog ) Orange LED (Threshold 5 → 8) Orange LED (Batteries) Green LED (Threshold 1 → 4) PROG-button Threshold...
The Connexoon io must not be connected with internet for this handling Press 2 s on the PROG button of the Press 2 s on the The LED blinks and Sunis WireFree II io sensor until the PROG button of the Connexoon. becomes green green LED lights up Program the sensor on a TaHoma Follow the instruction on the interface of the TaHoma.
Sunis WireFree II io sensor Operating mode 1 Standard operating mode Send the Maestria+ 50 io motors to the down end-limit when sun is detected Rolling Rolling shutters with External Ext. venetian shutters tilting slats screen Internal screen Awning blind...
Sunis WireFree II io sensor 3 Switch from “standard” modus to “My” operating mode A new sensor is always delivered in “Standard” mode >5s To switch the mode press ...the LEDs are blinking. 5s on the “+” button until… The “My” mode is activated 4 Switch from the “My”...
Sunis WireFree II io sensor Demo mode 1 Activate the demo mode demo is automatically deactivated after 3 minutes. An order will be send 30 s after the threshold is exceed. Never change the threshold in demo mode. >5s to activate the DEMO mode ...the orange and green...
Sunis WireFree II io sensor Set the threshold in a 1-way installation 1 Check the threshold Press briefly on the “+” of “-“ button to check the threshold 2 Change the threshold Press briefly on the “+” or “-“ Press briefly within 2 s on the button to check the “+”...
Sunis WireFree II io sensor Set the threshold on a Connexoon io The threshold is set on the interface. You can create up to 4 scenarios per sensor. Create a scenario Choose a new scenario or to Press on the pictogram...
Sunis WireFree II io sensor Use in a 1-way installation Remark: We don’t need anymore a sensorbox for the correct working of the Sunis WireFree II io sensor. 1 Activate the sun function Situo 5 Variation A/M io Smoove A/M io Slide the Auto/Manu switch to Auto...
Use in a 2-way installation The activation and deactivation of the sun function on a Connexoon io or a TaHoma is done in the interface. The Sunis WireFree II io sensor doesn’t work with a Easy Sun io transmitter. Use with a Connexoon io...
Need help?
Do you have a question about the Sunis WireFree II io and is the answer not in the manual?
Questions and answers