TEXA RDC Tool Manual page 13

The tool was designed to be mechanically sturdy and suitable for use
in the workshop.
Careless use and excessive mechanical strain may impair its
efficiency.
Safety Measures:
• Do not drop, shake or bump the tool.
• Do not perform any kind of intervention that may damage the tool.
• Do not open or disassemble the tool.
The tool was designed to be electrically safe and to work with specific
supply voltage levels.
Failure to comply with the specifications related to the power supply
may impair the tool's efficiency.
Safety Measures:
• Do not wet the tool with water or other liquids.
• The tool's power supply must always be connected following the procedures
described in this manual.
• Do not use external batteries to power the tool.
• When charging from the mains, use the battery charger provided with the tool, if
included.
The electromagnetic compatibility tests on the tool ensure that it can
be adapted to technologies normally used on vehicles (e.g.: engine
check, ABS, etc.). Nevertheless, if malfunctions occur, contact the
dealer of the vehicle.
en
13