Charge - TEXA RDC Tool Manual

9.2 Charge

The internal battery can be charged:
• from the mains using the power adapter supplied;
• from a PC using a USB connection.
The device is powered and can be regularly used while charging.
A complete charge normally takes approximately 5 hours when connected
to the mains continuously.
Do not charge the tool in environments with a temperature lower
than 0 °C or higher than 45 °C.
Charge the internal battery completely when activating the device
for the first time.
Keep the device powered using a mains power adapter while
updating the software.
Always charge the device after using it.
22