Equipment Specifications - RHINO FR162 Operator's Manual

Flex-wing mechanical level lift rotary mower

Table of Contents

The Rhino Model FR240/FR162 Rotary Cutter is designed primarily for weed, grass, and brush up to 3"

diameter and consists of a center unit with two variable position wings together having a cutting width of 20

feet. Wing operating angles and machine cutting height are independently controlled using hydraulic cylinders.

A self-leveling linkage maintains a level cutter at all cutting heights. Power from the tractor PTO is split at the

power divider gearbox and supplied to each of the blade gearboxes. Each blade gearbox has two free-

swinging uplift blades designed to cut grass, corn stalks and light brush. Free-swinging blades reduce the

shock of impact when a stationary object is hit. Slip clutches are installed on each gearbox for additional

protection. Front and rear discharge shields are included as standard equipment.

FR240

Cutting Width

240"

Transport Width

115"

Overall Width

248"

Overall Length

216"

Cutting Height

2"-16"

HP Required (min)

80HP

Cutting Capacity(max)

Drawbar Load Rating(min) 2770 lbs

Wing Flex Up

90°

Wing Flex Down

22°

Tongue Weight

2770 lbs

FR240-FR162 01/11

INTRODUCTION