Equipment Specifications - RHINO FN120 Operator's Manual

The Rhino Model FN180/FN120 Rotary Cutter is designed primarily for weed, grass, and brush up to 5"
diameter and consists of a center unit with two variable position wings together having a cutting width of 15-10-
1/2feet. Wing operating angles and machine cutting height are independently controlled using hydraulic
cylinders. A self-leveling linkage maintains a level cutter at all cutting heights. Power from the tractor PTO is
split at the power divider gearbox and supplied to each of the blade gearboxes. Each blade gearbox has two
free-swinging uplift blades designed to cut grass, corn stalks and light brush. Free-swinging blades reduce the
shock of impact when a stationary object is hit. Slip clutches are installed on each gearbox for additional
protection. Front and rear discharge shields are included as standard equipment.
FN180
Cutting Width 180"
Transport Width 96""
Overall Width 186"
Overall Length 183"
Cutting Height 2" - 14"
HP Required (min) 70HP
Cutting Capacity(max) 5"
Drawbar Load Rating(min) 3200 lbs
Wing Flex Up 90°
Wing Flex Down 22°
Tongue Weight 2000 lbs
Overall Weight 5970 lbs
FN180/FN120 01/11
© 2011 Alamo Group Inc.
INTRODUCTION

Equipment Specifications

FN120 Blade Tip Speed
Center
126"
86-3/8""Center
133"
183"Wings
Wing
2" - 14"
70HP
5"
"
3200lbs
Power Divider
90°
Center & Wings
22°
Limited Warranty
2020 lbs
Driveline Size
6020 lbs
Main
Wings
Limited Warranty
Introduction Section 2-3
540 PTO 540 PTO
13,995 FPM 13,955 FPM
1000 PTO 1000 PTO"
13,960FPM 13960 FPM
540 PTO 540 PTO
15,162 15,162
1000 PTO 1000 PTO
16,630 16630
Gearbox Rating
325 HP 325 HP
285 HP 285 HP
6 Year 6 Year
CAT 6 CV CAT 6 CV
CAT 6 HD CAT 6 HD
2 Year 2 Year