Wing Driveline - RHINO FR162 Operator's Manual

MAINTENANCE

WING DRIVELINE

(Figure MntP-R-0011) Remove the two shield
bearings per half shaft by prying the head of the
bearings up with a screwdriver, and pulling them out
with pliers.
(Figure MntP-R-0012) Grasp the Yoke and shield
tube and pull shaft from the shield.
(Figure MntP-R-0013) Grease the shield bearing
grooves on the yokes and the inner telescoping
member before assembly.
FR240-FR162 01/11 Maintenance Section 5-8
©2011 Alamo Group