Entering A Name - Name - Sennheiser SK 5212 Instructions For Use Manual

MHz
MHz
Entering a name –
Via the "NAME" menu, you can enter a freely selectable name for the
transmitter. This name can be displayed on the standard display and can
consist of up to six characters such as:
!
letters (without pronounciation marks),
!
numbers from 0 to 9,
!
special characters and spaces.
After you have changed to the setting mode of the "NAME" menu, the first
segment starts flashing on the LC display panel
SET
UP
DOWN
The current frequency of the selected channel
RF
is displayed.
Change the frequency by sliding the multi-
function switch
(DOWN).
Store your setting.
NAME
Slide the multi-function switch
tion (UP) or
(By sliding the switch only once, the display
jumps either forwards or backwards to the next
character. If you keep the switch slid, the dis-
play starts cycling continuously.)
Press the multi-function switch
position SET) to change to the next segment.
Have you entered the name completely? Press
the multi-function switch
SET) to store your setting. "STORED" appears
on the LC display panel
to the position
.
(DOWN) to select a character.
(switch position
.
(UP) or
to the posi-
(switch
23