Motorola Canopy AP Getting Started page 18

C A N O P Y
Motorola Wireless Internet Platform
Canopy BH—Remote Internet Feed to Canopy 5.2GHz Access Point
5.7GHz
Canopy
BH-SM
Pt-Pt
This is a basic use of Canopy BH to provide a remote Ethernet feed to a
Canopy 5.2GHz Pt-MultiPt Access Point. The Canopy Access Point
provides power and GPS for all Canopy units at the site, including the
Canopy BH-AP unit.
The Canopy BH-AP unit receives powered and GPS synchronization from
the Canopy AP Installation Kit. The Canopy BH-AP unit must be config-
ured to "Sync AP to Received Signal", and not "Generate AP Sync
Signal".
Page 6
Canopy AP
Pt-MultiPt
5.2GHz
Canopy
BH-AP
Pt-Pt
Canopy AP
Installation
Kit
Canopy BH—Co-Located Canopy BH units (multiple dedicated links)
5.7GHz
Canopy
Canopy
BH-AP
BH-SM
Pt-Pt
Pt-Pt
Canopy AP
Installation
Kit
Where multiple Canopy BH links share a site in common, a Canopy AP
Installation Kit can be employed to (a) power all the Canopy units at the
same site, and (b) provide synchronization. In this configuration, Canopy
BH-AP units should be placed at the same site, and the end-points of the
star configuration should be configured as Canopy BH-SM units.
The Canopy BH-AP unit receives powered and GPS synchronization from
the Canopy AP Installation Kit. The Canopy BH-AP unit must be config-
ured to "Sync AP to Received Signal", and not "Generate AP Sync
Signal".
C A N O P Y
Motorola Wireless Internet Platform
5.7GHz
Canopy
Canopy
BH-SM
BH-AP
Pt-Pt
Pt-Pt
Page 7