Advertisement
C A N O P Y
Motorola Wireless Internet Platform
Canopy BH—Remote feed of multiple Canopy Access Points from a
common remote location
Canopy AP
Pt-MultiPt
5.2GHz
5.7GHz
Canopy
Canopy
BH-AP
BH-SM
Pt-Pt
Pt-Pt
Canopy AP
Installation
Kit
Where using Canopy BH to feed multiple Canopy Point-to-MultiPoint
Access Points from a remote location, all Canopy BH links can be synchro-
nized from the Point-to-MultiPoint Access Points (each is equipped with a
Canopy AP Installation Kit). Here, the Canopy BH-SM units end up co-
located, but operate synchronized, each synchronized by the Canopy BH-
AP units co-located at the Point-to-MultiPoint Access Points.
The Canopy BH-AP unit receives powered and GPS synchronization from
the Canopy AP Installation Kit. The Canopy BH-AP units must be
configured to "Sync AP to Received Signal", and not "Generate AP Sync
Signal".
Page 8
Canopy AP
Pt-MultiPt
5.2GHz
5.7GHz
Canopy
Canopy
BH-AP
BH-SM
Pt-Pt
Pt-Pt
Canopy AP
Installation
Kit
Canopy BH—Dedicated Link
5.7GHz
Canopy
BH-SM
Pt-Pt
This is a basic, simple, stand-alone dedicated link using Canopy BH.
Either side can be SM or AP. For convenience, the Canopy BH-AP unit
should be on the side of the link where normal management functions are
performed. The management side can directly access the internal web
pages of the Canopy BH-AP unit, and can access the Canopy BH-SM web
pages through the Canopy BH-AP unit.
Both Canopy BH units (SM & AP) both are powered by AC Adapters ...
neither side uses a Canopy AP Installation Kit. Since there is no Canopy
AP Installation kit at either side, there is no GPS synchronization, and the
Canopy BH-AP unit must be configured to "Generate AP Sync Signal",
and not "Sync AP to Received Signal".
C A N O P Y
Motorola Wireless Internet Platform
Network
Canopy
Management
BH-AP
side
Pt-Pt
Page 5
Advertisement
