Place Of Installation - Technogym Element+ Lower Back User Manual

Place of installation

To ensure safe, comfortable and effective use of the product, the place of installation must comply with certain specific requirements; in particular, before
choosing where to install the product, check that at least the following requirements are met.
- Temperature between +10°C and +25°C.
- Sufficient ventilation to maintain a humidity level between 20% and 90%, when the equipment is in use.
- Adequate lighting, so that the physical exercise takes place in pleasant and relaxing conditions.
- Sufficient clearance on all sides of the product, taking into account its maximum dimensions when in use, to ensure safety; and a space at least 60
cm wide on the side where the product is accessed.
- A flat, stable and vibration-free floor surface, with adequate carrying capacity for the equipment's weight.
The place of installation must comply with all binding regulations.
The product must be installed and used in a place where access and supervision are specifically controlled by the owner.
Do not expose the product to direct sunlight.
Do not use outdoors. Do not leave the product outdoors, exposed to the elements (rain, sun, wind, etc.). Do not expose the product to water jets.
Do not position the product in humid areas, such as near pools, hydromassage tubs, saunas.
Lower Back
9