Advertisement
LAT & LOW PULL ATTACHMENT FOR POWER RACK
STRENGTH TRAINING SYSTEM
INSTRUCTION MANUAL
MODEL : F431
QUESTION?
As a quality home gym supplier we are committed to your complete satisfaction. If you have
questions, or find missing or damaged parts, we will guarantee your complete satisfaction through
our authorized dealer service centers or our home office customer service department. Please call
your local dealer for assistance.
7180-1
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for BodyCraft F431
Summary of Contents for BodyCraft F431
-
Page 1: Instruction Manual
LAT & LOW PULL ATTACHMENT FOR POWER RACK STRENGTH TRAINING SYSTEM INSTRUCTION MANUAL MODEL : F431 QUESTION? As a quality home gym supplier we are committed to your complete satisfaction. If you have questions, or find missing or damaged parts, we will guarantee your complete satisfaction through our authorized dealer service centers or our home office customer service department. -
Page 2: Before You Begin
If not, the seat may slip and cause serious injury. 7. Exercise with care to avoid injury. 8. If unsure about the proper use of the BODYCRAFT LAT & LOW PULL ATTACHMENT FOR POWER RACK strength training system call your... -
Page 3: Exploded View
EXPLODED VIEW... - Page 4 PARTS CHART NO. DESCRIPTION QTY. BASE FRAME TOP FRAME GUIDE ROD 81.8" 75mm X 170mm LINK PLATE 50mm X 170mm LINK PLATE DOUBLE PULLEY BLOCK LAT BAR HOLDER TWO WAY TOP PLATE LAT BAR LOW ROW BAR STACK SPACER 24" 75mm X 45mm CAP 45mm X 75mm PLUG PULLEY...
- Page 5 ASSEMBLY Do NOT tighten any bolt until instructed. 1. Attach Base Frame (51) to Rear Frame of Power rack, using two 1/2" X 4" Hex Bolts (75), one Link Plate (55) and two 1/2" Nylon Nuts (82). Attach three 45 mm X 75 mm Cap (62) to Base Frame (51). 2.
-
Page 6: Cable Installation
CABLE INSTALLATION Top Cable Assemble cables and pulleys simultaneously. Insert screw end of Top Cable (74) into slot in front of Top Frame (52) and out of slot in rear of Top Frame. Attach Pulleys in bracket at these slots with cable running above as shown in Fig. 1 and Fig 2. Route cable down and around top pulley in Double Pulley Block (56) as shown in Fig.3 . - Page 7 Guide Rods (53). Enjoy many years of a Fit Lifestyle. Thank you for purchasing the Bodycraft Lat & Low Pull attachment for Power Rock Home Gym. If You have any questions, please call your local BodyCraft dealer.
Need help?
Do you have a question about the F431 and is the answer not in the manual?
Questions and answers