Leckey Squiggles+ User Manual page 17

9.5 Lateral supports
Loosen the hand knob
to adjust the width of
the lateral supports and
re-tighten when you have
achieved the desired
position. If, the lateral
supports are attached
with bolts instead of hand
knobs they can be adjusted
with the multi tool.
Always use caution to
ensure fingers do not
become trapped when
adjusting the lateral
supports.
9.6 Adjusting the
pelvic harness
To adjust the pelvic
harness pull the Velcro
receiving straps around
the user until the desired
position is achieved.
9.7 Chest and hip
support harness
To change the width of the
chest harness, lift the front
cover, adjust the Velcro
straps and set to the desired
width and replace the cover.
Always make sure the
plastic buckles are fully
engaged when using
the chest harness.
Squiggles + Stander User Manual p.17