Leckey Squiggles+ User Manual page 10

p.10 Squiggles + Stander User Manual
7.7 Attaching the tray in
prone and supine
The tray is attached to the
stander by inserting the
tubes into the receiving
brackets. Once the tray is
located in position the knobs
should be tightened. The
cut out of the tray should
always be facing the child.
To attach the tray whilst in
the prone version, ensure
that the tray receiving
tubes are at their
maximum height.
Always use caution
to ensure the child's
hands or arms do not
become trapped when
inserting the tray.
7.8 Attaching the grab rail
To attach the grab rail, inset
the receiving brackets
the tray slot and secure with
the plastic knob
on the other side and then
sleeve the tubes into the
tube and tighten the
plastic knob .
in
. Repeat
Supine Prone