Monoprice MP10 User Manual page 11

10. While squeezing the lever on the Feed
Mechanism, insert the filament and push it into
opening. Keep pushing until you feel resistance as
it hits the extruder. Release the lever on the Feed
Mechanism.
11. Touch the button in the E column on the
Move Menu to feed the filament into the extruder. Continue touching the button
until several centimeters of filament have been extruded.
12. Use the included plastic scraper to clean the extruded filament from the nozzle and
the build platform.
13. Touch the button on the Move Menu to return to the Main Menu.
14. Touch the Print button on the Main Menu. The printer will read the contents of the
memory card and display them on screen. Touch the cat.gcode entry to start
printing the model.
11